Sylomer SR 220 red
Polyurethane Elastomer for Vibration Insulation
Sylomer SR 220 red
1200 х 1500 х 12,5 mm sheet
Price on request
Variations
| Name | Price, euro./m2 | Price, euro./piece |
|---|---|---|
|
Sylomer SR 220, red
1200 х 1500 х 25 mm sheet
|
Description
Sylomer SR 220 is a unique material made by Getzner, Austria, used for vibration insulation of engineering equipment, building foundations, rail roads, etc. The material is produced in rolls or in single-piece supports of pre-defined sizes (customized). As an elastic layer between the vibration source and surface protected (the structure), Sylomer can be used along the entire supporting plane, or in fragments (under bearing assemblies).
Sylomer SR 220 can withstand static load of 0.220 N/mm2 and is used for vibration insulation of the least heavy equipment and structures.
Composition
Sylomer SR 220 is made of foamed polyurethane with mixed cell structure, with red colorant added.
Special Features of the Material
- Low resonant frequency - wide range of vibration insulation;
- Low elasticity modulus within the entire interval of operating loads;
- High resistance to dynamic loads;
- Resistance to environmental impacts;
- Possibility of operating at temperatures from -30 to +70°С;
- Sylomer SR 220 price is determined by its high-level specifications.
Characteristics
Physical and technical characteristics of Sylomer
| Type of material | SR220 |
|---|---|
| Colour | red |
| Long-term static load, N/mm2* | 0,220 |
| Peak load, N/mm2 (maximum)* | 4,0 |
| Friction losses factor | 0,13 |
| Static modulus of shear, N/mm2 (under the maximum static load) | 0,35 |
| Dynamic modulus of shear, N/mm2 (under the maximum static load, 10 Hz) | 0,64 |
| Abrasion wear, mm3 | 1000 |
| Static modulus of elasticity, N/mm2 (under the maximum static load) | 1,44 |
| Dynamic modulus of elasticity, N/mm2 (under the maximum static load, 10 Hz)* | 2,54 |
| Tensile strength during deformation 10%, N/mm2 | 0,22 |